We had been proceeding with plans anticipating the arrival of electricity and the subsequent implementation of various electrical installations. However, since there were installations that could not be performed solely with an electrician's license, we will now pursue obtaining a new qualification.

In my last blog post, we finally got electricity connected to the building. With electricity now available, we can use outlets, which means we can install PCs, interfaces, and other equipment, as well as set up a refrigerator and microwave. To install these, we'll start DIY work on the floor.

I finally managed to set up the building that will become the studio. Next, I'll be working on getting the infrastructure in place. First, once we have electricity available, we'll be able to power the equipment needed for the recording booth.

In previous blog post, I wrote about how we finally managed to compact the ground enough to be able to erect a building. Now, we are finally ready to erect a building that will serve as our studio on this compacted land.

We are improving the ground in areas where the land becomes completely muddy when it rains, causing muddy conditions. The ground ourselves in preparation for the arrival of the container houses.

While clearing the land to build a base, we discovered that when it rained, the land became completely muddy and soggy. We are considering how to solve this situation and the huge wall.

In order to build the base, we will clear the land. To do this, we will be clearing roots, as we did the logging last time.

In order to build a base, the land is cleared. To do this, the first step is "logging"! We will make full use of our licenses and knowledge we have studied to achieve this.

I will be changing the name of my dump truck, which I mentioned in a previous blog. If you would like to do the name change on your own, I hope this will be helpful.

To create a base in SKYSQUARE, we will first clear the land. Chainsaws will be used for logging, and excavators and trucks will be used for clearing.

The tenth certification will be a national certification with a high degree of difficulty! For the development of SKYSQUARE and the development of game sound, I will do my best to pass the exam this time as well.

SKYSQUAREと東京間の毎回の移動や、ホテルなどの利用は大変です。 そのため、山梨県に新たな拠点となる物件の契約に乗り出しました。

We are in a difficult situation because we have to rent a dump truck every time we have to carry out the transport work that is essential for SKYSQUARE. We wanted to have our own dump truck, and finally decided to purchase one.

We would like to replace the bucket of our heavy equipment with a type that can level the ground, called a slope type.

I have purchased a "slope bucket" to compact SKYSQUARE soil. I will receive and load/unload it myself.

In order to stabilize the soil in SKYSQUARE, "crushed stone" will be purchased and spread.

In order to continue installing tents in SKYSQUARE, pallets were used for scaffolding.

The oversized sound insulation wall has been completed! It is 3m high, 30m wide, and quite massive, and is one more step forward.

Following the huge pit, work has begun on installing another 30 meters of sound insulation walls.

We have embarked on the ninth license, the "Rough Terrain Vehicle License".